1. Familiar with drawings.

　　不用說，尤其是結構圖必須非常熟悉，如果結構圖沒有表示出來，也指大圖、剖面圖，或者與結構圖結合。

　　Needless to say, structural drawings in particular must be very familiar. If they are not expressed, they also refer to large drawings, section drawings, or combination with structural drawings.

　　2、閱讀結構說明。

　　2. Reading structure description.

　　為什么后說熟悉圖紙，還要把結構解釋出來呢?由于結構描述中包含了大量的信息，在結構方案中沒有涉及，很多細節都體現在結構描述中，如桿的一些措施，吊桿的基礎梁等，所以結構描述必須閱讀。

　　Why do we need to explain the structure when we are familiar with the drawings? Because the structural description contains a lot of information, which is not involved in the structural scheme, many details are reflected in the structural description, such as some measures of the pole, the foundation beam of the suspender, etc., so the structural description must be read.

　　3.定義項目中使用的規范和版本。

　　3. Define the specifications and versions used in the project.

　　在結構的施工說明中會有規范和規范版本的施工依據，如果沒有新的版本必須在圖紙審核中提出，明確施工依據版本。

　　In the construction instructions of the structure, there will be the construction basis of the standard and the standard version. If there is no latest version, it must be put forward in the drawings review, and the construction basis version should be clearly defined.

　　4. 熟悉圖紙評審。

　　4. Familiar with drawing review.

　　聯合審查圖紙必須特別熟悉,因為聯合審查圖紙涉及到很多不同的圖紙,圖紙或沒有明確的內容,相關內容在鋼筋樣本將應當依據的共同審查圖紙,圖紙。

　　Joint review drawings must be particularly familiar with, because the joint review drawings involve many different drawings, drawings or no clear content, the relevant content in the steel bar samples should be based on the joint review drawings, drawings.

　　5. 做一個列表。

　　5. Make a list.

　　包括:高度、混凝土標號、所用鋼筋類型及相應的錨固長度，搭接長度的內容制成一張粘貼在突出位置的清單，以便當鋼筋試樣容易找到時，節省時間。

　　Including: height, concrete label, type of steel bar used and corresponding anchorage length, overlap length of the content of a list pasted in the prominent position, so as to save time when the steel bar sample is easy to find.

　　6、小心，再小心

　　6. Be careful, be more careful

　　鋼筋試樣車削是一項需要耐心和細心的工作。畢竟在施工現場發現了一些錯誤，鋼筋切板的錯誤是不容易發現的。因此，為了避免給自己增加工作量，在打樣的過程中，我必須有足夠的耐心和細心的態度。

　　Turning steel bar specimens requires patience and care. After all, some errors were found in the construction site, and it is not easy to find the errors of steel plate cutting. Therefore, in order to avoid increasing the workload for myself, in the process of proofing, I must have enough patience and careful attitude.