Metal wire mesh is a kind of wire mesh which is made by welding or weaving. There are three kinds of wire mesh: metal wire mesh, rolled wire mesh and hook mesh. Generally speaking, wire mesh is made of high quality low carbon steel wire (black), which is ugly in appearance and poor in anti-corrosion performance, which are two important reasons for the need to treat the surface of wire mesh.

　　腳網廠家生產的絲網板表面處理方法有:冷鍍鋅、熱鍍鋅、噴塑、浸塑、電鍍羅。鐵絲網表面處理后,鐵絲網防腐性能雙打,說冷鍍鋅,熱浸鍍鋅,這兩種方法在網格表面涂有一層鋅,防腐的效果和美麗,但這個過程是完全不同的,冷鍍鋅防腐性能沒有鍍鋅性能很好,但是是冷鍍鋅是便宜得多。

　　The surface treatment methods of wire mesh plate produced by foot mesh manufacturer include cold galvanizing, hot galvanizing, spraying, dipping and electroplating. After surface treatment of wire mesh, the anti-corrosion performance of wire mesh is doubled. First of all, cold galvanizing and hot dipping galvanizing are mentioned. These two methods have a layer of zinc on the surface of grid. The anti-corrosion effect is beautiful, but the process is completely different. The anti-corrosion performance of cold galvanizing is not as good as that of galvanizing, but the price is much cheaper than that of cold galvanizing.

　　涂塑網表是我們經常談論靜電粉末噴涂,它是使用靜電發生器使塑料粉末帶電,吸附表面的鐵板,然后通過烘烤180 ~ 220℃,所以粉融化,堅持金屬表面,塑料噴霧產品用于室內使用

　　Plastic coated mesh is often talked about electrostatic powder spraying. It uses electrostatic generator to electrified plastic powder, adsorb the surface of iron plate, and then bake 180 ~ 220 degrees, so the powder melts, adhere to metal surface, and plastic spray products are used indoors.

　　鋼絲網框，漆膜呈現扁平或啞光效果。塑料噴粉主要包括丙烯酸粉、聚酯粉等，一般網孔表面的塑料噴層厚度為0.1mm-0.2mm，適合室內使用。

　　Steel wire mesh frame, paint film presents flat or matte effect. Plastic powder spraying mainly includes acrylic acid powder, polyester powder, etc. Generally, the thickness of plastic spraying layer on the surface of mesh hole is 0.1mm-0.2mm, which is suitable for indoor use.

　　泡塑料網是通過加熱金屬均勻噴塑料粉末金屬形成一層塑料薄膜,或熱浸塑料液體冷卻的金屬零件塑料涂層在金屬表面,通常在網格的表面浸塑料層厚度0.7 mm - 0.8 mm,適用于戶外,美麗和防腐。

　　Soaking plastic mesh is a plastic film formed by uniform spraying of plastic powder metal by heating metal, or the plastic coating of metal parts cooled by hot-dipped plastic liquid is applied on the metal surface. Usually, the thickness of the plastic layer on the surface of the mesh is 0.7 mm - 0.8 mm, which is suitable for outdoor, beautiful and anti-corrosion.

　　鍍鉻絲網硬度高，根據鍍液的組成和工藝條件，其硬度可在400 ~ 1200HV之間大范圍變化。耐熱性好，在500℃下加熱，其光澤、硬度均無明顯變化。鍍鉻絲網可與不銹鋼絲網相比較。

　　The hardness of chromium-plated wire mesh is high. According to the composition of plating solution and technological conditions, the hardness of chromium-plated wire mesh can vary in a wide range from 400 to 1200 HV. It has good heat resistance and no obvious change in gloss and hardness when heated at 500 C. Chromium-plated wire mesh can be compared with stainless steel wire mesh.