Wire mesh, also known as wire mesh, is a kind of wire mesh products welded in factories. Longitudinal and transverse reinforcing bars are arranged at a certain interval and at right angles to each other. All intersections are welded together by strong resistance pressure. Steel mesh.

　　產品規格：

　　Product specifications:

　　線徑：6-12mm

　　Line diameter: 6-12 mm

　　網眼：50-200mm

　　Mesh: 50-200 mm

　　寬度：0.5-3m

　　Width: 0.5-3m

　　長度：0.5-12m

　　Length: 0.5-12m

　　焊接鋼網是國內外公認的新型鋼筋混凝土結構鋼，廣泛用于工業的地板，屋頂，墻壁，地板，混凝土路面，橋面和機場跑道 和民居。  ，隧道襯砌，混凝土管，樁等。

　　Welded steel mesh is a new type of high-efficiency and high-quality reinforced concrete structural steel recognized at home and abroad. It is widely used in industrial floors, roofs, walls, floors, concrete pavement, bridge decks and airport runways and residential buildings. Tunnel lining, concrete pipe, pile, etc.

　　鋼筋混凝土表層加固方法：具有大大提高磚墻的承載力，彎曲剛度和壁延性，改變其固有振動頻率，提高正常使用階段性能的優點。 施工過程簡單，適應性強，砌體加固后的承載能力大大提高，具有成熟的設計施工經驗。 適用于在原墻上沒有裂縫和剪切的實心磚墻，多孔（孔徑不大于15mm）的空心磚墻和240mm厚的空磚墻。

　　Reinforcement method of reinforced concrete surface layer: It has the advantages of greatly improving the bearing capacity, flexural rigidity and ductility of brick wall, changing its natural vibration frequency and improving its performance in normal service stage. The construction process is simple and adaptable. The bearing capacity of masonry strengthened is greatly improved. It has mature design and construction experience. It is suitable for solid brick walls without cracks and shear on the original wall, hollow brick walls with porous (aperture less than 15 mm) and hollow brick walls with 240 mm thickness.

　　外部粘結的鋼加固方法：該方法屬于傳統的加固方法，是一種通過粘合劑將鋼板粘附到墻體裂縫部分的加固方法。 常用的粘合劑主要是環氧樹脂。 這種補強方法的優點是結構簡單，快速，田間工作量和濕作業小，對生產和壽命的影響小，構件的形狀和內部使用空間幾乎不變，但剪切力大。 墻壁的容量和正常使用可以大大提高。 舞臺的表現是相對可靠的； 它適用于砌體的加固，不允許增加原始構件的截面尺寸，但需要大幅增加截面承載力。

　　Externally bonded steel reinforcement method: This method belongs to the traditional reinforcement method, is a kind of reinforcement method by adhering steel plate to the crack part of the wall through adhesives. The common adhesives are epoxy resin. The advantages of this reinforcement method are simple structure, fast speed, less field work and wet operation, less impact on production and life, almost unchanged shape and internal use space of components, but large shear force. Wall capacity and normal use can be greatly improved. Stage performance is relatively reliable; it is suitable for masonry reinforcement, does not allow the increase of the original section size, but needs to significantly increase the section bearing capacity.