The production and installation of steel mesh explain the rationality of these data. The reinforcement network is longitudinal reinforcement, and the transverse reinforcement is arranged in a certain distance to form a right angle, and all cross welded joints are welded together.

　　1. 帶鋼的厚度誤差是常見的鋼鐵生產,這個誤差范圍是不容易控制在生產過程中,主要是因為過去的過程,和磨料磨損的工具(部分失敗的一個基本類型),導致一個錯誤的鋼鐵,是不容易控制,但在這個0。25毫米的射程是可以控制的，超過這個范圍就有故意的懷疑。

　　1. The thickness error of strip steel is a common steel production, and this error range is not easy to control in the production process, mainly because of the past process, and abrasive wear tools (a basic type of partial failure), resulting in a wrong steel, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which there is deliberate suspicion.

　　2. 鋼筋網片適用于工廠生產，由冷軋帶肋鋼筋或冷軋圓鋼棒焊接而成的鋼筋網片。是一種的混凝土面板材料。鋼筋網外觀尺寸5毫米,誤差范圍是原板在切割過程中,如果做了,在錯誤不會影響鋼結構的安裝鋪設,如果大于錯誤,可能空間,或者不能購物,但是我們公司,經過多年的經驗,基本已經控制誤差范圍在1 - 2毫米。

　　2. Steel mesh is suitable for factory production. It is welded by cold-rolled ribbed steel bar or cold-rolled round steel bar. It is a kind of high quality and efficient concrete panel material. The appearance size of the steel mesh is 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of the steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.

　　3.對角線誤差:這種誤差主要是由于鋼材生產過程中，擠壓，或加熱不均勻造成的塑料修補。

　　3. Diagonal error: this error is mainly caused by plastic repair caused by uneven extrusion or heating during steel production.

　　4. 鋼筋網的平整度，由于鋼筋網焊接機的壓力焊接工藝，使鋼筋網的安裝可以完全平整。另外，我公司采用大型鋼筋網壓焊機，馬鋼、扁鋼的平整度不超過0。5mm也是焊接質量的一個重要指標。

　　4. The flatness of the reinforcing mesh, due to the pressure welding process of the reinforcing mesh welding machine, makes the installation of the reinforcing mesh completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Ma Steel and flat steel is not more than 0. 5mm is also an important index of welding quality.

　　上面的鋼網標準基本上是鋼絲網行業的現有生產力水平可以達到,及其物理性質的材料,安裝條件,使用綜合考慮鋼網產品的開發,只要數據誤差在標準范圍能滿足使用。熱齒鋼網類型:

　　The above steel mesh standard is basically that the existing productivity level of the steel mesh industry can be achieved, and its physical properties of materials, installation conditions, use comprehensive consideration of the development of steel mesh products, as long as the data error within the standard range can meet the use. Type of hot tooth steel mesh:

　　，在普通軸承扁鋼槽溝切割后，形成單杠扁鋼壓力鎖。鋼筋網片適用于工廠生產，由冷軋帶肋鋼筋或冷軋圓鋼棒焊接而成的鋼筋網片。是一種的混凝土面板材料。噴嘴的加工高度為100mm，齒形熱鋼網的長度一般小于2000mm。

　　First of all, after the ordinary bearing flat steel groove is cut, a horizontal bar flat steel pressure lock is formed. The steel mesh is suitable for factory production. It is welded by cold-rolled ribbed steel bar or cold-rolled round steel bar. It is a kind of high quality and efficient concrete panel material. The machining height of the nozzle is 100mm, and the length of the toothed hot steel mesh is generally less than 2000mm.

　　二是整體軸承扁鋼與單杠扁鋼具有相同的高度，切削槽深度是軸承扁鋼的一半。熱齒鋼網的高度不得大于100mm。熱齒鋼網的長度一般小于2000mm。

　　The second is that the whole bearing flat steel has the same height as the horizontal bar flat steel, and the cutting groove depth is half of the bearing flat steel. The height of hot tooth steel mesh shall not be greater than 100mm. The length of hot tooth steel mesh is generally less than 2000mm.

　　三、遮陽型承重扁鋼開30度或45度溜槽，槽干扁鋼壓鎖成型。可根據不同需要交其它間距、規格的熱鋼筋網，可采用普通碳鋼、不銹鋼、mate等材料。熱鋼筋網的高度小于100mm。

　　3、 The sun shading type bearing flat steel is provided with 30 degree or 45 degree chute, and the dry flat steel of the chute is pressed and locked. According to different needs, the hot steel mesh with other spacing and specifications can be made of ordinary carbon steel, stainless steel, mate and other materials. The height of hot mesh is less than 100mm.

　　4. 重型熱筋網由高扁鋼和單杠扁鋼咬合而成，在1200噸的壓力下成型。適用于大跨度荷載。

　　4. The heavy-duty hot bar mesh is made of high flat steel and horizontal bar flat steel, and is formed under the pressure of 1200 tons. It is suitable for long-span load.