After the installation of steel mesh, it can be said that there are many advantages and advantages in use. Therefore, the reinforcement mesh now has a good prospect. Steel mesh is a kind of steel mesh with longitudinal reinforcement and transverse reinforcement arranged at a certain distance and at right angles, and all cross welding points are welded together. However, before the reinforcement mesh is put into use, it must go through the installation procedure. Therefore, the installation method will determine the use of good or bad.

現在，鋼筋網常用的安裝的方法有以下三種：一種是直接的進行焊接安裝、一種是使用安裝夾進行安裝，還有一種就是使用角鋼預埋的安裝方式。但是這三種安裝方式各自有著自己的安裝的優點與缺點。

At present, there are three commonly used installation methods of steel mesh: one is direct welding installation, one is using installation clamp, the other is using angle steel embedded installation. But these three installation methods have their own advantages and disadvantages.

一、焊接固定的安裝方法

1、 Fixed welding method

這種方法是安裝鋼筋網比較常用的一種方法。在進行安裝的時候，在鋼筋網的四周，有四個焊接點，只要將這四個焊接點焊牢，基本上就可以投入使用了。但是如果這樣的鋼筋網需要經常的才壓重物的話，就要在這四個焊接點焊接的基礎上，再多找幾處焊接點進行焊接。

This method is a common method to install steel mesh. During installation, there are four welding points around the reinforcement mesh. As long as these four welding points are welded firmly, it can be put into use basically. However, if the steel mesh needs to be weighed frequently, it is necessary to find several more welding points on the basis of the welding of the four welding points.
      

二、安裝架固定方法

2、 Fixing method of mounting frame

這種安裝鋼筋網的方法也比較常見，但是一般的會將這樣的安裝的方法使用在承載著機械設備的鋼筋網上。建筑鋼筋網鋼筋交叉點開焊數量不得超過整個網片交叉點總數的1%。并且任一根鋼筋上開焊點數不得超過該根鋼筋上交叉點總數的一半。鋼筋網更外邊鋼筋上的交叉點不得開焊。采用這樣的安裝方式，有一個比較突出的優點就是安裝施工比較簡單，再有就是如果有拆卸需求的話，也會比較方便。

This method of installation of steel mesh is also more common, but the general method will be used in the steel mesh bearing mechanical equipment. The number of open welding at the intersection of building steel mesh reinforcement shall not exceed 1% of the total number of crossing points of the whole mesh. Moreover, the number of open welding points on any steel bar shall not exceed half of the total number of crossing points on the steel bar. No open welding is allowed at the intersection of the outermost reinforcement of the mesh. Using this installation method, first of all, there is a more prominent advantage is that the installation and construction is relatively simple, and then if there is a demand for disassembly, it will be more convenient.

三、角鋼鑲嵌固定方法

3、 Angle steel inlay fixing method

對于這樣的安裝方法，如果是把鋼筋網安裝使用在管道溝上，作為溝蓋板，是非常好的一種安裝施工的方法，進行施工的時候，安裝時，在溝的兩邊先固定好兩道角鋼，然后再把鋼筋網鑲嵌在這兩道角鋼的上面。這種安裝方法的使用，可以說是完全獨立的，可以不再使用焊接的方法，以及使用固定夾進行安裝。

For such installation method, if the reinforcement mesh is installed on the pipe trench as the trench cover plate, it is a very good installation construction method. During the construction, during the installation, two angles are fixed on both sides of the trench, and then the steel mesh is embedded on the two angles. The use of this installation method can be said to be completely independent, and the welding method can not be used any more, and the fixing clip can be used for installation.

以上的這幾種安裝鋼筋網的方式方法，是不同的安裝方法要應用在不同的安裝施工上，再有一點就是每一種安裝的方法，在每一種施工中都各自有著各自的優缺點。鋼筋焊接網它的出現對提高建筑施工效率、結構質量及可靠性、改變傳統的建筑施工方法都具有十分重要的意義，可用于鋼筋混凝土結構的配筋和預應力混凝土結構的普通鋼筋。那么，在進行施工的時候，要選對安裝的方法，再有就是有做到揚長避短。

The above several installation methods of steel mesh, first of all, different installation methods should be applied to different installation construction, and another point is that each installation method has its own advantages and disadvantages in each construction. The appearance of welded steel mesh is of great significance in improving construction efficiency, structural quality, safety and reliability, and changing the traditional construction method. It can be used for reinforcement of reinforced concrete structure and ordinary reinforcement of prestressed concrete structure. First of all, when there is a long-term construction method, we should avoid the short-term installation.